Link-systems LinkNet II Manuel d'utilisateur télécharger pdf (Page 62)

4.15.4 Resetting a Preventive Maintenance Item

When a PM has “tripped” (exceeded its limit), it will appear in the “tripped items” PM report. When

the item has been inspected or serviced, it must be reset for the next interval. Resetting the item leaves

all the information the same except the value, which is reset to zero. The PM history report will show

all the times and at what point this item has been reset.

To reset a PM item, select it from the PM listing dialog of a machine or tool (see Figure 4.39 and

Figure 4.40) and click the “Reset PM Item” button. A message box will appear to asking to verify that

the item is to be reset. Hit “Yes” to reset the item, and “No” to cancel the operation.

Manual Version 1.1 10/28/2001

4.40

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 98 99

Pas de commentaire

Link-systems LinkNet II Manuel d'utilisateur Page 62