Link-systems Omni II Automatic Setups Module Manuel d'utilisateur télécharger pdf (Page 21)

October 16, 2008 Manual Version 1.1

3-7

Figure 3-7 Type "C" Valve Configuration

Section 3.3 Counterbalance Control Installation

The automatic counterbalance control system consists of an air control board mounted on the

5100 Automatic Setup base board, a control valve (or valves), and a pressure transducer. The

typical manually controlled press counterbalance system looks something like Figure 3.8.

Figure 3-8 Typical Counterbalance System

For automatic control, the pressure regulator and check valve are replaced with an air valve

system. Figures 3.9 and 3.10 illustrate systems using the Type “A” and Type “C” valves

described in Section 3.2. In all cases a pressure transducer is used to monitor the air pressure.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 76 77

Pas de commentaire

Link-systems Omni II Automatic Setups Module Manuel d'utilisateur Page 21