Link-systems System 1100 Tonnage Monitor Manuel d'utilisateur télécharger pdf (Page 111)

ERROR CODES

___________________________________________________________________

Error No. Message / Action

10-8

than 125% of the channel rating.

060 Channel 1 high setpoint < low setpoint.

061 Channel 2 high setpoint < low setpoint.

062 Channel 3 high setpoint < low setpoint.

063 Channel 4 high setpoint < low setpoint.

The Peak tonnage high setpoint of the channel

indicated by the error code is set to a value less

than the low setpoint.

1) Adjust the high or low setpoint so that the high

setpoint is greater than the low setpoint.

064 Data window 1, channel 1 high setpoint too high.

065 Data window 1, channel 2 high setpoint too high.

066 Data window 1, channel 3 high setpoint too high.

067 Data window 1, channel 4 high setpoint too high.

The Data window 1 high setpoint of the channel

indicated by the error code is set to a value

greater than 125% of the channel rating.

1) Check the MACH RATING setting in the Config menu

for correctness.

2) Adjust the indicated setpoint to a setting less

than 125% of the channel rating.

068 Data window 1, channel 1 low setpoint too high.

069 Data window 1, channel 2 low setpoint too high.

070 Data window 1, channel 3 low setpoint too high.

071 Data window 1, channel 4 low setpoint too high.

The Data window 1 low setpoint of the channel

indicated by the error code is set to a value

greater than 125% of the channel rating.

1) Check the MACH RATING setting in the Config menu

for correctness.

1 2 ... 106 107 108 109 110 111 112 113 114 115 116 117

Pas de commentaire

Link-systems System 1100 Tonnage Monitor Manuel d'utilisateur Page 111