Link-systems System 1100 Tonnage Monitor Manuel d'utilisateur Page 57
- Page / 117
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
APPLICATIONS INFORMATION
___________________________________________________________________
4-7
4.2.3 Overdrive Double Action Presses
Overdrive double action presses have an inner and an outer slide
that are driven by connections from crankshafts located in the
crown (top) of the press structure.
If the strain links are installed on the uprights of the press
(double action presses are usually straight side structures) the
peak tonnage displayed will be the sum of the outer slide and the
inner slide tonnages. Additionally, One data window can be used to
measure the tonnage of the outer slide alone. The data window cam
should be set to close before the outer slide reaches the bottom of
the stroke then open before the inner slide contacts the material
to be formed.
- SYSTEM 1100 ACCESS CODES 1
- NORMAL ACCESS CODE: 3721 1
- STROKE COUNTER 1
- ACCESS CODE: 0072 1
- SYSTEM 1100 TONNAGE MONITOR 2
- OPERATING MANUAL 2
- INTRODUCTION 11
- $DISPLAY $ 17
- $SETPOINTS $9 17
- $ PEAK $ 18
- $ TONNAGE $9 18
- $PEAK $ 19
- $DW1 (ON) $9 19
- $STORE $ 21
- $RECALL $9 21
- $ENTER JOB# $ 21
- $ENTER DESC.$9 21
- $SELECT JOB $9 23
- $PART $ 27
- $BATCH $9 27
- $CAL-CHECK $ 31
- $MACH RATING$9 31
- APPLICATIONS INFORMATION 55
- Figure 14 55
- INSTALLATION 61
- ERROR CODES 117
- Error No. Message / Action 117
(79 pages)
(89 pages)
Commentaires sur ces manuels