Link-systems OmniLink 5000 Manuel d'utilisateur télécharger pdf (Page 92)

6.22

the stroke. In Automatic Single Stroke the output will remain on while the press is stopped at the top and

the press control is waiting for the proper automatic initiation signal from the feed.

Section 6.3.7 Stop At Top Output

This output (OR-16) turns On when the press de-energizes the clutch/brake output in order to

automatically stop the press at the top of the stroke. It remains On until the press comes to a complete

stop. This can be used by external equipment such as transfer systems as an indication that the press is

stopping at the top and to complete a feed operation. This output is also used in applications where a soft

brake is being controlled (see section on valve monitor).

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 114 115

Pas de commentaire

Link-systems OmniLink 5000 Manuel d'utilisateur Page 92